Dekema AUSTROMAT 624 Operating Instructions Manual Download Page 117

Page: 117 / 155

AUSTROMAT

624 / 644

Operation

Operating Instructions (Version 01/2012)

117

7. Click on [Load].

(Press [ESC] to return to the Program Manager without loading the set.)

8. The Program Manager displays the "Load set" window.

•

The left table “External sets” shows the firing programs of the selected sets,

•

The right table (“Current set”) shows the firing programs of the set that is being loaded
to the control of the firing furnace (active).

•

Double-click on a firing program in the current set to go directly to the firing program
input window.

Fig. 6-7

Program Manager > Compile firing programs

9. Select the desired firing program in the external set and click one of the following buttons:

[Shift]

Corresponds to the Shift key on a keyboard. This allows you to
select associated blocks in the external set:

•

Click the first desired program (beginning of the block),

•

Press

[Shift],

•

Click the last desired program (end of the block).

All of the programs in the block are selected.

[Accept]

Copies the selected firing program of the external set to the same
program numbers of the current set. A query appears and asks if
you want to overwrite the existing programs in the current set.
Confirm the query to accept the firing programs.

Summary of Contents for AUSTROMAT 624




























































































































































Search results

Summary of Contents for AUSTROMAT 624

Reviews:

Related manuals for AUSTROMAT 624

Brands by name

Popular brands

Dekema AUSTROMAT 624, Operating Instructions Manual

Search results

Summary of Contents for AUSTROMAT 624

Reviews:

Related manuals for AUSTROMAT 624

Brands by name

Popular brands