Dekema AUSTROMAT 624, Operating Instructions Manual

Page: 78 / 155

5. User interface AUSTROMAT
®
624 / 644
78 Operating Instructions (Version 01/2012)
The following table lists the available functions in the "Setup" menu and provides a short
description. A detailed explanation can be found in the indicated section in the column "See
section".
Function Description See section
System control functions
[Units] Select the units for temperature, pressure
and compression (only
644 pressing
furnaces).
5.7.1.1
[Language] Select a language for the user interface. 5.7.1.2
[Date/time] Current date and time in the firing furnace
control. 5.7.1.3
[Screen setting] Determines how long to wait until the
screensaver is activated after an entry is
made. 5.7.1.4
[Network] Option
Network settings for the firing furnace.
5.7.1.5
[General code] Access levels for the firing furnace. 5.7.1.6
Settings for the firing furnace
[Furnace ID] Enter the furnace ID. 5.7.2.1
[Acoustic signal] Set the acoustic signal at the end of the
program. 5.7.2.2
[Drying temperature] Setting the temperature for drying. 5.7.2.3
[Heating settings] Defines the maximum temperature rise
rates and power consumption. 5.7.4.4
[Long-term readiness] Specifies if “Sleep mode” is active after the
end of a program. 5.7.2.5
[Lift settings] Specifies if a warning is displayed before
opening the lift when the firing chamber is
hot.
Only the 644 : After the pressing program is
over, the safe lift position is assumed to
prevent broken or tipped muffles from falling
over.
5.7.2.6