Dekema AUSTROMAT 624 Operating Instructions Manual Download Page 87

Page: 87 / 155

AUSTROMAT

624 / 644

5. User interface

Operating Instructions (Version 01/2012)

5.7.2. System

setting

functions

5.7.2.1. Furnace ID

In the "Setup" menu, click the [Furnace ID] button. The following window appears for entering
the furnace ID. The current furnace ID is displayed together with the current, furnace-specific
hardware and software versions.

Fig. 5-22

Setup > Furnace ID

Buttons

•

[OK]:

Accepts the settings and switches back to the "Setup" menu.

•

[Options]:

Opens a window and displays the options that are
activated/deactivated for your firing furnace. Refer to Fig. 5-23.

Change furnace ID

To prevent confusing firing furnaces from each other (for example
when printing records), an individual ID can be entered for each
firing furnace.

•

Click the entry field for the furnace ID. The alphanumeric
keyboard window appears.

•

Enter your individual furnace ID.

•

Click on [OK].

Summary of Contents for AUSTROMAT 624




























































































































































Search results

Summary of Contents for AUSTROMAT 624

Reviews:

Related manuals for AUSTROMAT 624

Brands by name

Popular brands

Dekema AUSTROMAT 624, Operating Instructions Manual

Search results

Summary of Contents for AUSTROMAT 624

Reviews:

Related manuals for AUSTROMAT 624

Brands by name

Popular brands