Dekema AUSTROMAT 624, Operating Instructions Manual

Page: 71 / 155

AUSTROMAT
®
624 / 644 5. User interface
Operating Instructions (Version 01/2012) 71
Time "T" and at least a double-digit number define the time ( T ime)
in seconds.
Autodry "A" defines the temperature in °C on the insulation table
(
A utodry),
Pressure
Only the
644 pressing
furnace:
"L9" and a single-digit number define the pressure. The
appendix contains a table with the pressures.
•
L90 = contact pressure,
• L97 = maximum pressure.
Audible signals "T" and a single-digit number define the number of audible
signals,
Jump command " /x(x) "- causes a direct jump to a different memory with
automatic continuation of the program. The program is
continued without interruption.
• xx defines the memory number of the program that is to
continue,
• Number of characters: 1 to 2-character (0…99). No
space may be inserted between the jump command "/"
command and the program memory number.
Command connector " . " connects two commands. Temperature rises, lift rises,
press time shortening and active cooling are possible
("V.Cxxxx").
Temperature rise
(temperature, firing chamber) "T0xx.Cxxxx" defines a temperature ramp in the firing
chamber by means of a temperature gradient.
•
T defines the ramp in °C/min,
•
C defines the end temperature in °C in the firing
chamber.
Temperature rise (time, firing
chamber) "T(x)xx.Cxxxx", (x) <> 0 defines a temperature ramp in the
firing chamber by means of time.
• T defines the time in s,
• C defines the end temperature in °C in the firing
chamber.
Temperature rise
(temperature, object) "T0xx.Axxxx" defines a temperature ramp of the firing object
by means of a temperature gradient.
•
T defines the ramp in °C/min,
•
A defines the end temperature in °C on the insulation
table (firing object).
Temperature rise (time,
object) "T(x)xx.Axxxx", (x) <> 0 defines a temperature ramp of the
firing object by means of time.
•
T defines the time in s,
• A defines the end temperature in °C on the insulation
table (firing object).