Dekema AUSTROMAT 624, Operating Instructions Manual

Page: 45 / 155

AUSTROMAT
®
624 / 644 5. User interface
Operating Instructions (Version 01/2012) 45
5.2. Screen display
The screen display for operating the AUSTROMAT
®
is divided into different areas.
Fig. 5-4 Screen display (example of the Program Manager)
1 Information bar 3 Display area
2 Function bar
Information bar Shows all of the important parameters:
• The Temperature in the firing chamber: "Tc",
•
Vacuum in the firing chamber: "Vc",
•
The firing number "#", that is, how many firings have been
properly concluded,
•
The time and date when the firing furnace was used, or if a
program has been selected, the probable duration or remaining
time of the program,
• The current menu (in this case, the "Program Manager"), A lock
indicates that a program is protected by the general code,
•
The status of the firing furnace:
"Wait": The firing furnace is in wait mode,
"Run": A program is being processed (program is running),
"Edit": A program is being edited (program editor),
"Error": The firing furnace has malfunctioned.
Display area The display area shows the current menu of the firing furnace control
such as the Program Manager in Fig. 5-4.
Function bar The function bar contains the buttons for controlling and operating
the firing furnace. The names of the buttons depend on the selected
menu.