Dekema AUSTROMAT 624, Operating Instructions Manual

Page: 107 / 155

AUSTROMAT
®
624 / 644 6. Operation
Operating Instructions (Version 01/2012) 107
6.2. Mounting and removing a firing object
WARNING
Hot surfaces.
The firing chamber can reach temperatures above 1,000°C
during operation. There is an extreme burning hazard from
touching hot surfaces after the firing chamber is opened.
Never directly contact hot parts of the firing furnace. The firing
furnace requires several hours to cool after it is turned off.
Observe the following instructions:
•
Do not use your hands or any objects to grasp things in the
firing chamber,
•
Do not grasp the lift seat, insulation table or firing objects
with your bare hands,
• Use suitable tools (tweezers) to remove the firing objects, or
wear safety gloves.
Mounting the firing object
•
Place the firing object on the firing tray, and place the firing tray in the middle of the
insulation table.
•
When positioning the firing object and firing tray, ensure that no parts jut out over the edge
of the insulation table. There is a danger of damaging the firing object and thermal
insulation material when closing the firing furnace.
Fig. 6-1 Mounting the firing object
•
The height of the firing tray including the firing object may not exceed the following
dimensions. Otherwise, the thermocouple would be damaged in the firing chamber when
the chamber is closed:
•
Firing function: 36 mm height,
• Only the 644 pressing furnace: Pressing function: 65 mm high.
Removing the firing object
• Use suitable tools (tweezers) to remove the firing objects, or wear safety gloves.