Dekema AUSTROMAT 624 Operating Instructions Manual Download Page 21 | Manualshive

Page: 21 / 155

background image

AUSTROMAT

®

624 / 644

2. Safety

Operating Instructions (Version 01/2012)

21

2.4. Risks

Observe the following hazard instructions in all of your jobs with the firing furnace.

DANGER

Electrical shock from voltage-conducting parts.

The firing furnace is operated using mains voltage. Death may
result due to electrical shock from touching voltage-conducting
parts.

Observe the following instructions:

•

Never contact voltage-conducting parts,

•

Do not use your hands or any objects to grasp things in the
firing chamber,

•

Maintenance and service jobs may only be performed when a
device is not powered. Turn off the firing furnace, and pull
the power plug,

•

The protective conductor (inside and outside of the unit)
must always be safe for operation and may never be
disabled. The connection may never be intentionally
severed.

NOTE:
Only personnel with electrotechnical training and experience handling devices that
operate on mains voltage may perform work on the electrical components.

WARNING

Fire hazard.

The firing chamber can reach temperatures above 1,000°C
during operation. Heat-sensitive materials close to the firing
furnace can easily ignite and cause a fire.

Observe the following instructions:

•

Never operate the firing furnace without the insulation table
being mounted,

•

The vent holes in the cover of the firing chamber must be
unobstructed,

•

Make sure that flammable materials (such as cleaning
alcohol, wiping cloths, etc.) or objects that can be damaged
by heat are sufficiently distance from the firing furnace.

•

Never operate the firing furnace without supervision.

«
...
19
20
21
22
23
...
»

Summary of Contents for AUSTROMAT 624




























































































































































Reviews:

No comments

Related manuals for AUSTROMAT 624

GAS-FIRED UPFLOW FURNACE 394U

Brand: Bryant Pages: 4

Brand: Payne Pages: 12

Brand: Lennox Pages: 4

Brand: HomComfort Pages: 28

Brand: UPG Pages: 16

Brand: COZY Pages: 16

Brand: Coleman Pages: 8

Brand: Coleman Pages: 12

Clayton CL1660E

Brand: United States Stove Pages: 28

Brand: York Pages: 34

Brand: York Pages: 46

Brand: Bard Pages: 71

Brand: National Comfort Product Pages: 12

Brand: Coleman Pages: 14

Brand: Napoleon Pages: 88

FINOSINT KOMPAKT

Brand: FINO Pages: 38

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands