Dekema AUSTROMAT 624, Operating Instructions Manual

Page: 29 / 155

AUSTROMAT
®
624 / 644 4. Start-up
Operating Instructions (Version 01/2012) 29
4.2. Requirements at the setup site
NOTE:
The following instructions must be followed each time the firing furnace is moved and
repaired.
Firing furnace
The setup site of the firing furnace must meet the following requirements:
• Set up the furnace on a dry, flat, solid surface.
•
The surface must be able to bear the weight of the firing furnace (see section 1.5).
•
Materials and objects that can be damaged by heat must be sufficiently distant from the
firing furnace.
• The vents in the firing furnace must not be obstructed to enable the circulation of cooling
air.
• A power socket must be close to the device and easily accessible.
•
The conditions in the environment at the setup site must meet the requirements in section
1.6.
Vacuum pump
The setup site of the vacuum pump must meet the following requirements:
•
Set up the vacuum pump at a well-ventilated site protected from dust and dirt.
• Easily flammable and temperature-sensitive materials and objects must be sufficiently
distant from the vacuum pump.
• The vents in the vacuum pump must not be obstructed to enable the circulation of cooling
air.