1
KGALB0101KIT
Installation Instructions
LABEL KIT FOR FIXED SPEED, 2---STAGE
AND VARIABLE SPEED, 33.3 IN (846 MM)
MULTIPOISE, NON---CONDENSING FURNACES
NOTE
: Read the entire instruction manual before starting the
installation
SAFETY CONSIDERATIONS
FIRE, EXPLOSION, ELECTRICAL SHOCK
HAZARD
Failure to follow this warning could result in personal
injury, death and / or property damage.
Improper installation, adjustment, alteration, service,
maintenance, or use can cause carbon monoxide poisoning,
explosion, fire, electrical shock, other conditions, which
could result in personal injury or death. Consult your
distributor or branch for information or assistance. The
qualified installer or agency must use only factory--
authorized kits or accessories when servicing this product.
!
WARNING
Installing and servicing heating equipment can be hazardous due
to gas and electrical components. Only trained and qualified
personnel should install, repair, or service heating equipment.
Untrained personnel can perform basic maintenance functions
such as cleaning and replacing air filters. All other operations
must be performed by trained service personnel. When working
on heating equipment, observe precautions in the literature, on
tags, and on labels attached to or shipped with the unit, and other
safety precautions that may apply.
Follow all safety codes. In the United States, follow all safety
codes including the National Fuel Gas Code (NFGC) NFPA No.
54--2006/ANSI Z223.1--2009. In Canada, refer to the National
Standard of Canada, Natural Gas and Propane Installation Codes
(NSCNGPIC), CAN/CGA--B149.1 and .2--2010.
Wear safety glasses and work gloves. Have a fire extinguisher
available during start--up, adjustment procedures, and service
calls.
Recognize safety information. This is the safety--alert symbol
!
!
.
When you see this symbol on the furnace and in instructions or
manuals, be alert to the potential for personal injury.
Understand
the
signal
words
DANGER,
WARNING,
CAUTION, and NOTE. The words DANGER, WARNING, and
CAUTION are used with the safety--alert symbol. DANGER
identifies the most serious hazards which will result in severe
personal injury or death. WARNING signifies hazards which
could result in personal injury or death. CAUTION is used to
identify unsafe practices which would result in minor personal
injury, or product and property damage. NOTE is used to
highlight suggestions which will result in enhanced installation,
reliability, or operation.
INTRODUCTION
This instruction covers the installation of safety, service and
information labels used on Fixed Speed, 2--speed and
Variable--speed, 80 AFUE, 33.3--in. (846mm) high, induced--
combustion furnaces.
Table 1 – Kit Contents
PART NUMBER
PART NAME
327558---101
Label, Warning
336996---101
Label, Clearance, and Warning
327801---201
Label, Info
337802---201
Label, Info
337803---201
Label, Info
IIK---KGALB---04
Installation Instructions
