Dekema AUSTROMAT 624, Operating Instructions Manual

Page: 108 / 155

6. Operation AUSTROMAT
®
624 / 644
108 Operating Instructions (Version 01/2012)
6.3. Select programs and start them
6.3.1. With the touchscreen
1. After turning on the firing furnace, the Program Manager automatically appears on the
touchscreen. Select the desired program (see section 5.3). The firing furnace heats to a
preheating temperature that depends on the selected program type (see section 5.5).
2. Click on [Selected program] in the Program Manager. The firing of the selected program is
displayed (program display, see section 5.4).
3. Click the program display [Program start]. The program is processed automatically (see
section 5.5).
4. While the program is running, the lift automatically moves up and down. Make sure that no
objects are in the way that could hinder the lift movement. Also do not attempt to manually
stop or accelerate the lift.
5. While the program is running, you can stop the program by clicking [Cancel program].
6.3.2. With web interface (optional)
NOTE:
This functionality is available as an option.
•
The options that are enabled for your firing furnace can be found in the menu
Setup > Furnace ID > Options (see section 5.7.2.1).
•
You can find information on enabling options in section 7.5.
NOTE:
To operate the firing furnace using the web interface, your browser must be Java-
capable, and the Java application must be activated.
Start Web interface
1. Start the browser on the computer.
2. Click on the bookmark for the firing furnace (if available), or enter the IP address for the
firing furnace in the address line of the browser (see section 4.4).
3. Enter your login data, that is, the password. The Program Manager opens (see section 5.3).
The remaining procedure is the same as that in section 6.3.1.