Dekema AUSTROMAT 624 Operating Instructions Manual Download Page 46

Page: 46 / 155

5. User interface

AUSTROMAT

624 / 644

Operating Instructions (Version 01/2012)

5.3. Program

Manager

Use the Program Manager menu to select the firing programs or sets and administer the
assignment of the individual program memories (such as copy or delete firing programs).

Fig. 5-5

Program Manager (example)

Display area

The display area of the Program Manager includes the following elements:

•

The program list shows all of the firing programs in the loaded set.

•

The left column "No" shows the program number,

•

The middle column "Program" shows the program name. A lock indicates that a
program is protected by the general code, (for example, see Fig. 5-21),

•

The right column "Type" shows the program type,

•

Scroll bar. This allows you to scroll through the table (as with conventional Windows
applications).

Summary of Contents for AUSTROMAT 624




























































































































































Search results

Summary of Contents for AUSTROMAT 624

Reviews:

Related manuals for AUSTROMAT 624

Brands by name

Popular brands

Dekema AUSTROMAT 624, Operating Instructions Manual

Search results

Summary of Contents for AUSTROMAT 624

Reviews:

Related manuals for AUSTROMAT 624

Brands by name

Popular brands