Dekema AUSTROMAT 624 Operating Instructions Manual Download Page 86

Page: 86 / 155

5. User interface

AUSTROMAT

624 / 644

Operating Instructions (Version 01/2012)

Programs protected by the general code are marked in the Program Manager with a lock and
have a colored background. In the program display, a lock in the information bar indicates that a
program is protected.

Fig. 5-21

Lock symbol for protected programs

Deactivate general code

•

In the "Setup" menu, click the [General code] button. The alphanumeric keyboard window
appears.

•

Enter the password for the general code.

The general code is deactivated.

Change protected programs

Change the protected program memories when the general code is activated as follows.

•

Deactivate the general code.

•

Reactivate the general code, and change the protected program range as desired.

Summary of Contents for AUSTROMAT 624




























































































































































Search results

Summary of Contents for AUSTROMAT 624

Reviews:

Related manuals for AUSTROMAT 624

Brands by name

Popular brands

Dekema AUSTROMAT 624, Operating Instructions Manual

Search results

Summary of Contents for AUSTROMAT 624

Reviews:

Related manuals for AUSTROMAT 624

Brands by name

Popular brands