3.10.5 8-5* Digital/Bus
Parameters for configuring the control word Digital/Bus
merging.
NOTE!
These parameters are active only when
8-01 Control Site
is
set to [0]
Digital and control word
.
8-50 Coasting Select
Option:
Function:
Select control of the coasting function via the
terminals (digital input) and/or via the bus.
[0]
Digital
input
Activates Start command via a digital input.
[1]
Bus
Activates Start command via the serial
communication port or serial communication
option.
[2]
Logic AND Activates Start command via the serial
communication bus/serial communication port,
AND additionally via one of the digital inputs.
[3]
*
Logic OR
Activates Start command via the serial
communication bus/serial communication port
OR via one of the digital inputs.
8-51 Quick Stop Select
Select control of the quick stop function via the terminals (digital
input) and/or via the bus.
Option:
Function:
[0]
Digital input
[1]
Bus
[2]
Logic AND
[3]
*
Logic OR
8-52 DC Brake Select
Option:
Function:
Select control of the DC brake via the terminals
(digital input) and/or via the serial communi-
cation bus.
NOTE!
Only selection [0] Digital input is available
when
1-10 Motor Construction
is set to [1]
PM non-salient SPM.
[0]
Digital
input
Activates Start command via a digital input.
[1]
Bus
Activates Start command via the serial
communication port or serial communication
option.
8-52 DC Brake Select
Option:
Function:
[2]
Logic
AND
Activates Start command via the serial
communication bus/serial communication port,
AND additionally via one of the digital inputs.
[3]
*
Logic OR
Activates Start command via the serial
communication bus/serial communication port
OR via one of the digital inputs.
8-53 Start Select
Option:
Function:
Select control of the Adjustable frequency drive
start function via the terminals (digital input)
and/or via the serial communication bus.
[0]
Digital
input
Activates Start command via a digital input.
[1]
Bus
Activates Start command via the serial
communication port or serial communication
option.
[2]
Logic
AND
Activates Start command via the serial
communication bus/serial communication port,
AND additionally via one of the digital inputs.
[3]
*
Logic OR
Activates Start command via the serial
communication bus/serial communication port
OR via one of the digital inputs.
8-54 Reversing Select
Option:
Function:
[0]
Digital
input
Select control of the Adjustable frequency drive
reverse function via the terminals (digital input)
and/or via the Serial communication bus.
[1]
Bus
Activates the Reverse command via the serial
communication port or Serial communication
bus option .
[2]
Logic
AND
Activates the Reverse command via the Serial
communication bus/serial communication port,
AND additionally via one of the digital inputs.
[3]
*
Logic OR
Activates the Reverse command via the Serial
communication bus/serial communication port
OR via one of the digital inputs.
8-55 Set-up Select
Option:
Function:
Select control of the Adjustable frequency drive
set-up selection via the terminals (digital input)
and/or via the serial communication bus.
[0]
Digital
input
Activates the set-up selection via a digital
input.
Parameter Descriptions
FC 300 Programming Guide
MG33MD22 - VLT
®
is a registered Danfoss trademark
3-91
3
3
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20872-Danfoss-131H4490-VLT-Automation-VT-Drive-VFD-FC302-460V-25-HP.aspx