Danfoss VLT AutomationDrive, Programming Manual

Page: 96 / 234

6-25 Terminal 54 High Ref./Feedb. Value
Range: Function:
Application
dependent
*
[-999999.999 -
999999.999
ReferenceFeed-
backUnit] Enter the analog input
scaling value that
corresponds to the
maximum reference
feedback value set in
3-03 Maximum Reference .
Application
dependent
*
[-999999.999 -
999999.999
ReferenceFeed-
backUnit] Enter the analog input
scaling value that
corresponds to the
maximum reference
feedback value set in
3-03 Maximum Reference .
6-26 Terminal 54 Filter Time Constant
Range: Function:
0.001 s
*
[0.001 -
10.000 s] Enter the time constant. This is a first-
order digital low pass filter time
constant for suppressing electrical noise
in terminal 54. A high time constant
value improves dampening but also
increases the time delay through the
filter.
NOTE!
This parameter cannot be adjusted while the motor is
running.
3.8.4 6-3* Analog Input 3 MCB 101
Parameter group for configuring the scale and limits for
analog input 3 (X30/11) placed on option module MCB
101.
6-30 Terminal X30/11 Low Voltage
Range: Function:
0.07 V
*
[ 0.00 - par.
6-31 V] Sets the analog input scaling value to
correspond to the low reference/
feedback value (set in
6-34 Term.
X30/11 Low Ref./Feedb. Value ).
6-31 Terminal X30/11 High Voltage
Range: Function:
10.00 V
*
[ par. 6-30 -
10.00 V] Sets the analog input scaling value to
correspond to the high reference/
feedback value (set in
6-35 Term.
X30/11 High Ref./Feedb. Value ).
6-34 Term. X30/11 Low Ref./Feedb. Value
Range: Function:
0.000
*
[-999999.999 -
999999.999 ] Sets the analog input scaling
value to correspond to the low
voltage value (set in
6-30 Terminal
X30/11 Low Voltage ).
6-35 Term. X30/11 High Ref./Feedb. Value
Range: Function:
100.000
*
[-999999.999 -
999999.999 ] Sets the analog input scaling
value to correspond to the high
voltage value (set in
6-31 Terminal X30/11 High
Voltage
).
6-36 Term. X30/11 Filter Time Constant
Range: Function:
0.001 s
*
[0.001 - 10.000 s] A 1 st
order digital low pass filter
time constant for suppressing
electrical noise on terminal X30/11.
NOTE!
This parameter cannot be changed while the motor is
running.
3.8.5 6-4* Analog Input 4 MCB 101
Parameter group for configuring the scale and limits for
analog input 4 (X30/12) placed on option module MCB
101.
6-40 Terminal X30/12 Low Voltage
Range: Function:
0.07 V
*
[ 0.00 - par.
6-41 V] Sets the analog input scaling value to
correspond to the low reference/
feedback value set in
6-44 Term.
X30/12 Low Ref./Feedb. Value .
6-41 Terminal X30/12 High Voltage
Range: Function:
10.00 V
*
[ par. 6-40 -
10.00 V] Sets the analog input scaling value to
correspond to the high reference/
feedback value set in
6-45 Term.
X30/12 High Ref./Feedb. Value .
6-44 Term. X30/12 Low Ref./Feedb. Value
Range: Function:
0.000
*
[-999999.999 -
999999.999 ] Sets the analog output scaling
value to correspond to the low
voltage value set in
6-40 Terminal
X30/12 Low Voltage .
Parameter Descriptions FC 300 Programming Guide
MG33MD22 - VLT
®
is a registered Danfoss trademark 3-71
3 3
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20872-Danfoss-131H4490-VLT-Automation-VT-Drive-VFD-FC302-460V-25-HP.aspx