Danfoss VLT AutomationDrive Programming Manual Download Page 101

Page: 101 / 234

6-70 Terminal X45/1 Output

Option:

Function:

[135] Torque%

nom
4-20mA

The torque setting is related to the motor
torque setting.

[136] Power 4–20

Taken from

1-20 Motor Power [kW]

[137] Speed 4–20

Taken from

3-03 Maximum Reference

. 20mA

= Value in

3-03 Maximum Reference

[138] Torque 4–20

Torque reference related to 160% torque.

[139] Bus ctrl.

0-20 mA

An output value set from the serial
communication bus process data. The
output will work independently of internal
functions in the Adjustable frequency drive.

[140] Bus ctrl.

4-20 mA

An output value set from the serial
communication bus process data. The
output will work independently of internal
functions in the Adjustable frequency drive.

[141] Bus ctrl.

0-20mA,
timeout

4-54 Warning Reference Low

defines the

behavior of the analog output in case of bus
timeout.

[142] Bus ctrl.

4-20mA,
timeout

4-54 Warning Reference Low

defines the

behavior of the analog output in case of bus
timeout.

[150] Max Out

Freq
4-20mA

In relation to

4-19 Max Output Frequency

6-71 Terminal X45/1 Output Min Scale

Range:

Function:

0.00%

[0.00–
200.00%]

Scale the minimum output of the selected
analog signal at terminal X45/1 as a
percentage of the maximum signal value,
e.g., if 0mA (or 0hz) is desired at 25% of
the maximum output value, then program
25%. Scaling values up to 100% can never
be higher than the corresponding setting
in

6-72 Terminal X45/1 Max. Scale

6-72 Terminal X45/1 Output Max Scale

Range:

Function:

100%

[0.00–
200.00%]

Scale the maximum output of the selected
analog signal at terminal X45/1. Set the value
to the maximum value of the current signal
output. Scale the output to give a current
lower than 20 mA at full scale, or 20 mA at
an output below 100% of the maximum
signal value. If 20mA is the desired output
current at a value between 0–100% of the
full-scale output, program the percentage
value in the parameter, i.e., 50% = 20mA. If a
current between 4 and 20mA is desired at

6-72 Terminal X45/1 Output Max Scale

Range:

Function:

maximum output (100%), calculate the
percentage value as follows (example where
desired max. output is 10mA):

IRANGE mA

IDESIRED MAX mA

x 100 %

= 20 − 4 mA

x 100 % = 160 %

130BA877.10

[mA]

0/4

100%

Current

Analogue

output Min

Scale

par. 6-71

Variable for

output

example:Speed

[RPM]

Analogue

Output Max

Scale

par. 6-72

6-73 Terminal X45/1 Output Bus Control

Range:

Function:

0.00%

[0.00–100.00%] Holds the level of Analog Output 3

(terminal X45/1) if controlled by bus.

6-74 Terminal X45/1 Output Timeout Preset

Range:

Function:

0.00%

[0.00–
100.00%]

Holds the preset level of Analog Output
3 (terminal X45/1).
In case of a bus timeout and a timeout
function is selected in

6-70 Terminal

X45/1 Output

the output will preset to

this level.

3.8.9 6-8* Analog Output 4 MCB 113

Parameters for configuring the scaling and limits for
analog output 4. Terminal X45/3 and X45/4. Analog
outputs are current outputs: 0/4 – 20mA. Resolution on
analog output is 11 bit.

6-80 Terminal X45/3 Output

Option:

Function:

Select the function of Terminal X45/3 as an
analog current output.

[0]

No operation Same selections available as for

6-70 Terminal

X45/1 Output

Parameter Descriptions

FC 300 Programming Guide

3-76

MG33MD22 - VLT