DAHAO BECS-185, Owner'S Manual

Page: 39 / 236

Chapter 2 Embroidery Guide
Owner’s Manual of BECS- 185 Computerized Control System 27
machine head will automatically move to the corresponding needle position. User can
also change the color by pressing the color-changing shortcut keys marked with “
＋
,
－
”.
Please pay attention: if the user wants to automatically save the order of the manual
color-changing (when the “Store Manual Color” in embroidery parameters is set as yes),
user should operate it in the manual color-changing interface
5
、
Adjust Main Shaft Manually
：
Usually, the main shaft needs to stop at 100° at needle/color-changing,
frame-moving and beginning embroidery. The user can manually turn the main shaft to
100° when it hasn’t reached there. Click in the main interface and then choose
in the followed prompt to carry out the function.
After the operation, the icon (main shaft not in the right position) will be replaced
by (main shaft in the right position).
6
、
Back to Origin
In the main interface click and choose in the followed prompt. Then
the frame will return to the start point.