DAHAO BECS-185, Owner'S Manual

Page: 228 / 236

Appendix 6 Automatic Limits Function
216 Owner’s Manual of BECS- 185 Computerized Control System
Appendix 6 Automatic Limits Function for
Cloth Embroidery/ Cap Embroidery
1. Working Principles
The automatic limits function is to use the X-/Y+ limits coupler as the origins. The system
will determine the embroidery range of that frame according to the frame size and the distance
between the origin and the set frame center (Unit: mm). Once the embroidery is over this range,
the controller will activate the automatic protection to prevent the mechanical device from
being damaged. There are 10 different default frames preset in the 185 controller, including 9
cloth embroidery frames and 1 cap embroidery frame.
2. Method for Setting the Automatic Limits of Cloth Embroidery
(1) Set Frame Origin
Use “Auto Frame Origin” to set the frame origin. The specific method is at below:
Turn the menu to the last page and click to enter the “Other Function” menu