DAHAO BECS-185, Owner'S Manual

Page: 223 / 236

Appendix 5 Network Function of Embroidery Machine
Owner’s Manual of BECS- 185 Computerized Control System 211
connected to the corresponding pins. Cable made in this way is called “crossover cable”.
Pin Number
1 2 3 4
Corresponding Pin Number 3 6 1 4
Pin Color Green & white Green Orange & white Blue
Pin Number
5 6 7 8
Corresponding Pin Number 5 2 7 8
Pin Color Blue & white Orange Brown & white Brown
Shown in the following picture:
One terminal The other terminal
Usage:
a. Connection between switches through UPLINKS interface
b. Connection between HUB and switch
c. Connection between HUB and HUB
d. Direct connection between 2 PCs (NIC to NIC)
e. Connection between interfaces of Routers
f. Connection between ADSL Modem (Ethernet interface) and NIC of PC
2 Notes for network setting parameters
2.1 MAC address
In physical transmission of network bottom level, the computers are recognized by
physical address (MAC). So it’s necessary to keep the uniqueness of MAC address. When
the first two digits of MAC address are not zero, some network equipments regards it as
illegal MAC address, thus the equipment can’t be linked to the network. So the first two