DAHAO BECS-185, Owner'S Manual

Page: 157 / 236

Chapter 11
About JF Sequin Embroidery
Owner’s Manual of BECS- 185 Computerized Control System 145
direction.
Lever
：
The core part for feeding the sequins within this device is a lever mechanism,
which will send the sequins to their positions with its alternating motion.
2
、
Separate action of sequin-mending and sequin-feeding device;
3
、
Manual separate or collective feeding at single time
；
4
、
Separate display of the working statuses of sequin device
；
5
、
Sequin-feeding method and the feeding angle can be changed via the
operation panel.
Ⅲ
. Specifications
1
、
Size of Sequin available: Diameters at 3mm, 4mm, 5mm, 6.75mm and 9mm
；
2
、
Max speed at 850rpm.
11.2 Embroidery Procedure of Sequin
At sequin embroidery, user needs to follow the procedure at below:
1
．
Input design with sequin code, refer to 11.3
2. If necessary, please transform and edit the design, please refer to 11.4);
3. Set the sequin parameter according to the setting instructions in 11.5.
4. Check and adjust the sequin-feeding device (Refer to 11.8), so as to make sure the
sequin-feeding device works normally;
5. Set color-changing order (Refer to 11.6)
6. Return to main interface and confirm the embroidery;
7. Start embroidery.
Attention: during the embroidery, don’t dial the manual switch for moving the valve, or it
will cause the damage of the sequin-feeding device.
11.3 Input Sequin Design
Press in the main interface to enter disk selection interface to open the disk