DAHAO BECS-185, Owner'S Manual

Page: 89 / 236

Chapter 6 Memory Design Management
Owner’s Manual of BECS- 185 Computerized Control System 77
(which is after “To Offset Point?”.) to . If user chooses moving the frame to a
certain distance, first change (which is after “To Offset Point?”.) to , and
then click to set the moving-out distance: (2cm to 99cm) or (-2cm to
-99cm).
7
、
Repeat step 5 and 6 to set all the patching positions of the interface.
8
、
Click to save the patching information and return to the operation
selection interface. Click to cancel setting and return.
6.8 Make True Design Frame
This function is to create a new design according to the outline of the designated design.
1
、
Click in the main menu to enter the memory design management interface
2
、
Select the design in the memory design image area of the memory design
management interface.
3
、
Click to enter the design operation selection interface.
4
、
Click “Make True Design Frame” to enter its operation interface
5
、
If user doesn’t use the default values, please click the design number and design
name to change them.
6
、
Click to create a design and return to the design operation selection
interface. Click to cancel the setting and return.
6.9 Combine Design
This function is to combine two designs into a new one. The interval between the two
designs is the distance from the end point of the first design to the start point of the second