DAHAO BECS-185, Owner'S Manual, Page: 163 / 236

Chapter 11
About JF Sequin Embroidery
Owner’s Manual of BECS- 185 Computerized Control System 151
Setting method:
a) Click or to select sequin mode and click to confirm.
Sequin names are A, B, C and D. If all these four sequins are included, A will be on the
top, then B, C and D.
b) After that, press to confirm the sequin-feeding mode. Then the system will
ask user to input the number of sequins fed. Click the number keys to input the number
(Range: 0~9999). If a sequin group is only used for one stitch at the embroidery cycle, user
will need to input “1” and then press .
c) Click or until you see “END” in the blank or the feeding number
becomes “0”. Press to finish the setting.
For instance, if the current sequin mode is A2ABCD1CD1, the design will be like the
one at below: