DAHAO BECS-185, Owner'S Manual, Page: 126 / 236

Chapter 9 Assistant Operation
114 Owner’s Manual of BECS- 185 Computerized Control System
9.9 Embroider Design Outline
System will generate temporary outline data according to the current design. Users can
press the Start to embroider.
1
、
Click in the main interface to enter the assistant operation interface.
2
、
Click the key of “Emb Design Outline”.
3
、
System will calculate and wait for the confirmation from user.
The system will calculate the outline data, generate the temporary data and ask the user to
confirm the above operations. Click to confirm or click to cancel the
operation.
4
、
The system will return to the main interface and have access to embroidery
confirmation status.
The main interface will display . And the user can press the Start to embroider the
outline. After finishing it, the machine will return to preparation status.
9.10 Set Offset Point
The offset point can be set at any point other than the start point. When the machine starts
embroidering after the settings, the frame will firstly move from the offset point to the start
point and start normal embroidery. After embroidery, the frame will move back to the offset
point. Moreover, the offset point is also the standard for frame to move out at appliqué
embroidery. The function can only be used under the embroidery confirmation status and
before embroidery.