DAHAO BECS-185, Owner'S Manual

Page: 127 / 236

Chapter 9 Assistant Operation
Owner’s Manual of BECS- 185 Computerized Control System 115
1
、
In Embroidery Status, Click in the main interface to enter the assistant
operation interface.
2
、
Click the key for setting the offset point.
3
、
Move the frame to the offset point
The system will ask the user to move the frame to the offset point and then display the
coordinates of X and Y. Press the frame-moving key to move the frame to the offset point, and
then click
to confirm. Or click to cancel the operation.
4
、
System will save the position of the offset point and return to the main interface.
9.11 Needle Down
This function is designed for whole cloth embroidery (quilt embroidery). After part of the
embroidery is finished, the needle will stop and prick into the embroidery cloth to fix it. After
user releases the cloth, the machine will move the frame to the designated position. When the
cloth is fixed on the frame again, next operation for the embroidery can be performed. This
function can only be used under the embroidery confirmation status.
1
、
Click in the main interface to enter the assistant operation interface.
2
、
Click the key of “Needle Down”.
3
、
Confirm needle down action