DAHAO BECS-185, Owner'S Manual

Page: 125 / 236

Chapter 9 Assistant Operation
Owner’s Manual of BECS- 185 Computerized Control System 113
3
、
Input the coordinates of the first point in the line.
The system will ask the user to input that coordinates in the window.
You can use the manual frame-moving key on the panel to move the frame to the start
point of the line, and clicks to input the coordinates of the first point.
4
、
Input the coordinates of the second point in the line.
The user uses the manual frame-moving key on the panel to move the frame to the end
point of the line, and clicks to input the coordinates of the second point.
5
、
The system will create the temporary data of the line, enter the embroidery
confirmation status and return to the main interface.
The main interface will display the . And the user can press the Start to embroider the
line. After finishing it, the machine will return to the preparation status.