DAHAO BECS-185, Owner'S Manual

Page: 68 / 236

Chapter 4
Common Parameters and Color-Changing Order
56 Owner’s Manual of BECS- 185 Computerized Control System
No Figure Name Description
7 Insert a Needle
Number
Click this key and a needle number to
insert it in the current list of needle
sequence.
8 Delete a Needle
Number
Delete the needle number of the current
operation position in the needle list.
9 Set Cyclic Needle
Number
Cyclic setting according to the needle
sequence number list before the current
color block.
10 Move downward
Move downward the color-changing list
to select the color block.
11 Needle Number
Selection Area
Select needle number here.
12 Help
Display the help menu.
13 Cancel
Cancel the color-changing setting of this
time and return.
14 Interchange
Needles
Open the needle interchanging interface
and set it.
15 Needle Color
Setting
Select in the default color and set the
color of each needle
16 Confirm
Confirm: Save the color-changing setting
and return.
The design display area displays the designs which are under color-changing setting.
After changing the color-changing order, the display of design will be renewed at same time
which will have the effect after the change shown.
Color-changing order display area shows color block number, needle numbers and
needle colors
Design display can be in parallel with the setting, insertion and deletion of needle
number, which means users can set and change the color-changing order along with the
display.