DAHAO BECS-185, Owner'S Manual

Page: 167 / 236

Chapter 11
About JF Sequin Embroidery
Owner’s Manual of BECS- 185 Computerized Control System 155
12
、
Beam-breakage Detection Sen.
This parameter is used for the beam embroidery device. “0” is to turn off the sensitivity,
the range of this parameter is 0~10. The smaller value means the higher sensitivity of the
detection device.
13
、
Motor Number of L/R Sequin
The setting of this parameter should be based on actual device condition, if there is no
sequin device, please set it at 0.
14
、
Set 3/4/5/6.75/9mm of L/R Sequin
This parameter group is to set the sequin delivery angle. If it is wheel type sequin-feeding
device, please set it at single way; if it is lever type sequin-feeding device, please set it at
double ways. The parameters of this type are set correctly when the machine is produced. This
kind of parameters is closely related to “left/right sequin device A/B/C/D size and color”. For
example, “A size&color of R sequin” is set to “4mm X color”, and then the angle value should
be the one in “Set 4MM of R Sequin”.
15
、
A/B/C/D Size &Color of R/L Sequin
The setting of this parameter should depend on the mechanical structure. The
corresponded order from A to D is front motor to back motor.
Note: “Motor Number of L/R Sequin” is closely related to the number of A/B/C/D in
“A/B/C/D Size&Color of R/L Sequin”. For example, if “Motor Number of L/R Sequin” is set
to 2, then only the “A/B size&color of R/L sequin” will be displayed.
16
、
Sequin Gap Num. of L/R Sequin
This is to set gap number. If there is no gap, then it should be set to 0.
17
、
L/R Sequin Valve Action Time
This parameter is for setting the response time at adjusting the valve action. The larger
value means the longer response time. Please set it according to the actual condition of device.
Default value of it is 2.
11.6 Change Color Order and Set Sequin Mode
User must set sequin mode at setting color-changing for the normal multi-sequin design;
but for the multi-sequin design, user only needs set the color-changing order. The operation
procedure is at below: