DAHAO BECS-185, Owner'S Manual

Page: 20 / 236

Chapter 2 Embroidery Guide
8 Owner’s Manual of BECS- 185 Computerized Control System
life of the panel and to maintain its performance, please don’t apply too much pressure on the
screen during operation. Neither can user use the sharp or hard tools to click the screen.
III. Instruction of Floppy Disk
The floppy driver of this computer is the external attached device, which is connected to
the operation panel with the USB port. Please pay attention to the direction for plugging. Do
not apply force when the plug-in direction is wrong, or it may destroy the floppy driver and
the floppy disk itself.
IV. Instruction of USB Disk
Please pay close attention to electrostatic phenomenon. Don’t forget to discharge (we
suggest you should touch the machine stand or frame to discharge the static) before plugging
in/out the USB disk.
Pay attention to the direction of the USB disk at plug-in. Don’t pull out the USB disk
when system loads data from or write data to it. If the USB disk is pulled out or the power is
cut off during the data input/output, the data could be lost. In that case, please check the
integrity of data in the USB disk and repair it before using.
Attention: During the process of initialization, if the power is cut off or the USB disk is
pulled out, the USB disk may be damaged permanently.
V. Instruction of Network Connection
Please preset the network parameters before the connection, or it may cause the failure of
communication within the network.
2.2 Instruction of Control Panel
The operation can become much easier by using the hotkeys and the touching screen.
Meanwhile, the statuses of the hotkeys are displayed on the main interface correspondingly: