DAHAO BECS-185, Owner'S Manual

Page: 235 / 236

Appendix 6 Automatic Limits Function
Owner’s Manual of BECS- 185 Computerized Control System 223
In the above picture, C is the preserved distance, which users can set according to their
devices. B is the available range of cap frame for embroidery in the Y direction.
“Y Center” Y = A
－
C
－
B
／
2
。
Input the “X Center” X, “Y Center” Y and X/Y Embroidery Range for Cap Frame into the
parameters of “Cap Emb. Type J”.
Note: “X Center” and “Y Center” can be adjusted manually, so that the error in
measurement can be minimized.
4. Cancellation of Automatic Limits for Cloth Embroidery/ Cap Embroidery
Set the “N” in the “Frame Selection” at “Frame Para. 2”, so that the automatic limits
function of cloth embroidery/ cap embroidery can be cancelled. At the same time, the software
protection on the flat embroidery frame will be invalid as well.
A
B
C