DAHAO BECS-185, Owner'S Manual

Page: 134 / 236

Chapter 10 Other Functions
122 Owner’s Manual of BECS- 185 Computerized Control System
10.3 Set Frame Origin/ Power-off Protection
Setting the frame origin point is the premise for saving the design’s start point and setting
frame protection at sudden power-off. So after the installation or maintenance of machine, it’s
necessary to set the frame zero point or power-off protection.
1
、
Click in the main interface to enter the “Other functions” interface.
2
、
Click “Set Frame Origin”.
3
、
Users can decide either to use “manual set frame origin” or “auto set frame
origin”
System will ask users to make choice. Users can decide either to use “manually set frame
origin” or to use “auto set frame origin”.
Before setting the frame origin manually, user can move the frame to the desired origin
position, and click the key. Then the system will save the current position of frame as the origin
point. When meeting emergency stop due to malfunctions or something unusual such as power
off unexpectedly, etc. the machine will cancel the “setting frame origin” function to avoid the
mistakes. User should do operation of “manual set frame origin” again, if the frame has been
moved after power off, or power is resumed on again after repair.
If you hope the system automatically set the frame origin point, click “Auto set frame
origin”, and the system will move the frame automatically and set the zero point according to
the limit switch. So please ensure that the limit switch has been installed into the machine and
activated.