Appendix 6 Automatic Limits Function
Owner’s Manual of BECS- 185 Computerized Control System
221
Synchronization Status
At present, in the controller, we have preset 9 kinds of cloth embroidery frame for user,
which is in the parameter “Cloth Frame Type A/B/C/D/E/F/G/H/I”. These nine frame types can
be set in “Frame Selection” within “Frame Parameter 2” when user needs replace the frame.
3. Method for Setting the Automatic Limits of Cap Embroidery
Because the frame for cap embroidery is round, we can not calculate the “X Center” as
we do in cloth embroidery. The “X Center” for the Frame of Cap Embroidery should be
measured as below:
Set the “Frame Selection” as NO.
Manually move the frame to align the needle plate hole and the Center of cap frame in X
direction. Measure the Distance D (from frame edge to the X guide stand edge).
Summary of Contents for BECS-185
