DAHAO BECS-185, Owner'S Manual

Page: 69 / 236

Chapter 4 Common Parameters and Color-Changing Orderr
Owner’s Manual of BECS- 185 Computerized Control System 57
4.2.2.
Setting of Color-Changing Order
1
、
Click in the main interface to enter the parameter setting interface.
2
、
Click in the parameter setting interface to enter the color-changing
interface.
3
、
Input the needle numbers in order in the needle number selection area. The
design displayed in the design display area and the color list in the color-changing
display area will be renewed along with the input of each needle number.
4
、
Click to check if the input color-changing order is correct.
5
、
To change a needle number in the color-changing order, the user can
click to move the list, so as to put the target item to the current operation
position. And then click the new needle number.
6
、
In order to insert a needle number in the color-changing order, user needs
click to move the order list and to place the target item to the current
operation position, and then click
.
Finally, he has to click the number of the
needle to insert.
7
、
To delete a needle number in the color-changing order, click .
8
、
If the user has confirmed that the first N items are set correctly and hopes to
repeat the settings of the first N items from the N+1 item, he can click to
move the order list and to place the item N+1 to the current operation position and then
click .
9
、
After confirming the input color-changing order, user can click to save
the color-changing order and return. Clicking is to abandon the setting and
return.
Note: For detailed color-changing operations in sequin or cording embroidery, refer to
related chapters.