DAHAO BECS-185, Owner'S Manual

Page: 120 / 236

Chapter 9 Assistant Operation
108 Owner’s Manual of BECS- 185 Computerized Control System
9.1 Save Design Start Point
If the origin of the frame has been set (refer to “Set Frame Origin/ Power-off Protection”,
Chapter Chapter
10
), the machine will save the start position of the current design at the
embroidery preparation status or before embroidery. The start position will be kept in machine
memory.
1
、
Move the frame to start position.
2
、
Click in the main interface to enter the assistant operation interface.
3
、
Click “Save Design Start Position”. System will ask user to confirm action.
点
4
、
Click
Click to save the current frame position as the design’s start point. Click
to cancel the above operation.
9.2 Restore Design Start Point
If you have saved the start position of current design, you can use this function to locate
the frame to that saved start point.
1
、
Click in the main interface to enter the assistant operation interface.
2
、
Click the “Restore Design Start Position”.
3
、
Click to restore start position
4
、
Frame moves to the saved start position.