DAHAO BECS-185, Owner'S Manual

Page: 34 / 236

Chapter 2 Embroidery Guide
22 Owner’s Manual of BECS- 185 Computerized Control System
2
、
Set the color-changing order
— —
click and then needle to change color, after
that the system will have access to the color-changing interface.
3
、
Set appliqué
— —
click to have access to the Design Management interface.
Click Other Operation to set the appliqué of design.
4
、
For border inquiry, brooder idling. embroider standard line, embroider cross,
embroider line, embroider outline of design, user can click to have access to
Assistant Operation interface
5
、
Locate the design for embroidery at the center of frame.
— —
Click to have
access to the Assistant Operation interface. Attention: This function is to locate the soft limit
to the center of the frame. For setting soft limit, please click to have access to Other
Functions.
6
、
Save Start Point of Design
— —
Click to have access to the Assistant
Operation interface. Attention: user should set the frame origin before using the function for
saving and restoring the start point of design. For setting the frame origin, please click
to have access to Other Function for the further operations.
7
、
Setting Cyclic Embroidery
— —
Click to have access to the Parameter
Management Interface, where user should click “Embroidery Assistant Parameters” and set
the cyclic embroidery according to the hints.
IV
、
Confirm Embroidery