DAHAO BECS-185, Owner'S Manual

Page: 64 / 236

Chapter 4
Common Parameters and Color-Changing Order
52 Owner’s Manual of BECS- 185 Computerized Control System
The way for setting the parameter is similar to each other. This chapter will explain how
to set the “X-Y Scales” as an example and give the definitions of other parameters (Refer to
4.1.1 as reference).
4.1.1.
Setting X-Y Scales
This parameter controls the scaling percentages on X (horizontal) and Y (vertical)
direction, so as to scale up/down the design.
Design start bit
X&Y Scales:
X : 2 0 0 %
Y : 5 0 %
Design start bit
1
、
Press the “X-Y Scales”
After users press the “X-Y Scales” in the parameter list interface, a parameter modifying
window will appear in the right side of the screen.
2
、
Adjusting X-Y Scales
Press the number panel in the parameter-setting window to change the scaling ratios on