DAHAO BECS-185, Owner'S Manual

Page: 202 / 236

Appendix 1 Parameter List
190 Owner’s Manual of BECS- 185 Computerized Control System
No. Name of Parameter Default Value Range of Value Remarks
Jump
C18 Length of Trim 1 1~8 1 is the minimum length and 8
are the maximum length.
D05 Speed When
Trimming
80 80,90,100,…,250
C20 Lock Stitch. When
Trim
Yes No, Yes
C11 Slow Stitches After
Trim
2 stitch 1 stitch ~7 stitch
C21 Length of Lock Sti.
(mm)
0.6 0.3~1.5
C19 Lock Num. After
Trim
2 0~3 Set the lock stitch number at
pulling the bar for embroidery
after setting the trimming
C23 Action after Trim Frame Y Frame X, Frame Y,
Move Needle
C22
Frame after Trim No No, Yes
D03 Set Hold Startup
Para.
0 0~3
D07 Check Trim is OK No No, Yes
C82
Cut return angle adj
4 0
～
30
The same as above.
Sequin Parameters
（
Applicable for JF Sequin
）
C31
Speed for Sequin R 400 300,310,
…
,the
maximum speed
C32
Speed for Sequin L 400 300,310,
…
, the
maximum speed
C33
Auto Start for
Sequin
No No, Yes
D27
Time of Sequin
Action
3 0~15 Range: 0-15. For the machine
using valve to move the
presser, this parameter is
generally set at 2
～
3. For the
machine using stepping motor
to move the presser, this value
is set at 4
～
5.
C34
Sequin Up after T.B. No No, Yes It is used to control the
position of the sequin device
after thread-breakage
B17
Up Valve When
Jump & No cut
Yes No, Yes