DGS-6604
m
redistribute
CLI Reference Guide
517
redistribute
Use redistribute to redistribute routes from one routing domain into BGP. Use no
command to disable route redistribution.
redistribute
PROTOCOL
[route-map
MAP-NAME
]
no redistribute
PROTOCOL
Default
Route redistribution is disabled.
Command Mode.
Router configuration
Address family configuration
Usage Guideline
Note:
The user can use the command to redistribute prefix from different
sources to BGP protocol.
Example
The following example redistributes the OSPF process routes into BGP process.
You can verify your settings by entering the
show ip protocols bgp
command.
Syntax Description
PROTOCOL
Specifies the protocol whose routes are to be redistributed. It can be one of the
following keywords
connected, ospf, rip static.
The
static
keyword means to redistribute IP
static
routes.
The
connected
keyword refers to routes that are established automatically by
virtue of having enabled IP on an interface.
route-map
MAP-
NAME
(Optional) Specify the identifier of a route map used to filter the networks to be
redistributed. If not specified, all networks are advertised.
Switch(config)# router bgp 8001
Switch(config-router)# redistribute ospf
Switch(config-router)# end
Switch#
Summary of Contents for DGS-6600 Series
Page 1: ...0 9 3 ...
