DGS-6604
m
show ip interface
CLI Reference Guide
651
show ip interface
Use this command to display the information of ip interfaces.
show ip interface [
INTERFAC E-ID
] [brief]
Default
None
Command Mode
User EXEC or any configuration mode
Usage Guideline
An IP interface can be in either the down state or up state. When an interface is
in the up state, it can send and receive packets. If an interface is in the down
state, the directly connected routing entry is removed from the routing table.
Removing the entry allows the switch to use dynamic routing protocols to
determine backup routes to the network.
If an optional interface type is specified, then information for that specific
interface is displayed. This command only supports VLAN interface types.
If no optional arguments are specified, then information for all the interfaces is
displayed.
If the interface hardware is usable, the interface is marked "up." For an interface
to be usable, both the interface hardware and line protocol must be up.
Example
This example shows how to display the brief format of the
show ip interface
command.
Syntax Description
INTERFACE
-
ID
(Optional) Interface type and number. It refers to an IP interface, that is VLAN
interfaces only.
brief
(Optional) Displays a summary of the usability status information for each
interface.
Switch> show ip interface brief
Interface IP-Address Status Protocol
--------------------------------------------------------------
vlan1 10.90.90.90 up up
vlan2 20.1.1.1 up up
Total Entires: 2
Switch>
Summary of Contents for DGS-6600 Series
Page 1: ...0 9 3 ...