DGS-6604
m
logging host
CLI Reference Guide
403
facility
: local7
Command Mode
Global configuration
Usage Guideline
The number of supporting SYSLOG servers is project dependent. When the
number of configured SYSLOG servers reaches the maximum capacity, a new
SYSLOG server is unable to be configured before and existing entry is deleted
using the command
no logging host
.
The severity level limits the logging of system messages sent to Syslog servers
to only those messages at and up to the specified level. For example, if the
severity is debugging, all logs in the Syslog daemon are sent to the log server
host. If the level of log is alert, then only alert and emergency logs are sent.
The keyword facility specifies the syslog facility in the SYSLOG messages which
are sent to the server.
For the no command, if the IP address is not specified, all logging hosts will be
deleted.
Example
The below example shows how to create a log server with the host address
20.3.3.3. The command configures the server to receive logs with a severity level
set to critical
Verify the settings with the
show logging host
command.
Switch> enable
Switch# configure terminal
Switch(config)# logging host 20.3.3.3 severity critical
Summary of Contents for DGS-6600 Series
Page 1: ...0 9 3 ...
