DGS-6604
bgp default local-preference
CLI Reference Guide
74
bgp default local-preference
Use this command to change the default local preference value. To return the
local preference value to the default setting, use the no
form of this command
.
bgp default local-preference
NUMBER
no bgp default local-preference
Default
NUMBER
: 100
Command Mode
Router configuration.
Usage Guideline
The local preference attribute is a discretionary attribute that is used to apply a
degree of preference to a route during the BGP best path selection process.
This attribute is exchanged only between iBGP peers and used to determine
local policy. The route with the highest local preference becomes the preferred
route.
Example
This example shows how to configure default value of the local preference to 200
for autonomous system 65534:
Verify the settings by entering
show ip protocols bgp
command.
Syntax Description
NUMBER
Range of local preference is 0 to 4294967295. A higher number is preferred to a
lower number in the comparison.
Switch(config)# router bgp 65534
Switch(config-router)# bgp default local-preference 200
Summary of Contents for DGS-6600 Series
Page 1: ...0 9 3 ...
