DGS-6604
m
key
CLI Reference Guide
373
K
key
Use the
key
command to identify a key on a key chain used for routing protocol
authentication. Use the
no key
command to remove the key from the key chain.
key
KEY-ID
no key
KEY-ID
Default
There are no keys configured on the key chain.
Command Mode
key-chain configuration
Usage Guideline
Only Routing Information Protocol (RIP) Version 2 uses key chains.
Using the
key
command will enter into the key-chain key configuration mode.
It is useful to have multiple keys on a key chain so that the software can
sequence through the keys as they become invalid over a period of time. This is
based on the
accept-lifetime
,
send-lifetime
and
key chain
key command
settings.
If the last key expires, authentication will be invalid.
If there was a discrepancy in the set time of the router's keys, the first valid key
will be chosen.
To remove all keys, remove the key chain with the
no key chain
command.
Syntax Description
KEY-ID
The identification number of an authentication key of a key chain. The available
range for the key ID is a number from 0 to 2147483647, up to 32 key IDs can be
configured. The key identification numbers need not be consecutive.
Summary of Contents for DGS-6600 Series
Page 1: ...0 9 3 ...
