DGS-6604
m
show logging
CLI Reference Guide
727
show logging
Use
show logging
to display the state of the system logging process and the
contents of the standard system logging buffer.
show logging [host | buffer [
START-INDEX
[
STOP-INDEX
] |
+
VALUE
| -
VALUE
]]
Default
None
Command Mode
User EXEC or any configuration mode
Usage Guideline
Use this command to check the current settings of the system logging process
and view the logs in the system logging buffer.
If the keywords,
host
or
buffer
are not specified, then the switch only displays
general information about the state of system logging and the logging host table.
Examples
The following page shows an example of the command
show logging
with the
keyword
host
:
Syntax Description
host
(Optional) Displays the logging hosts.
buffer
(Optional) Only display the content of system logging buffer.
START-INDEX
(Optional) The logging index number to start the display from.
STOP-INDEX
(Optional) The logging index number to stop the display at.
If both the
START-INDEX
and
STOP-INDEX
are not specified, all logs in the
system logging buffer will be displayed.
If only
START-INDEX
is specified, the logs after the start index number
(included) will be displayed.
+
VALUE
(Optional) Using this argument paired with the number of messages (
VALUE
a
positive integer) will display the indicated number of first messages in the buffer.
-
VALUE
(Optional) Using this argument paired with the number of messages (
VALUE
a
positive integer) will display the indicated number of last messages in the buffer.
Summary of Contents for DGS-6600 Series
Page 1: ...0 9 3 ...