DGS-6604
ingress-checking
CLI Reference Guide
219
G
ingress-checking
Use the
ingress-checking
to enable ingress frame checking at a port. Use the
no ingress-checking
to disable the ingress frame checking function.
ingress-checking
no ingress-checking
Syntax
None
Default
Enabled
Command Mode
Interface configuration
Usage Guideline
The valid interfaces for this command are physical ports.
Use the
ingress-checking
interface command to enable ingress checking at the
switch interfaces. When ingress checking is enabled, if the port is not a member
port of the VLAN associated with the incoming frames, the frames will be
dropped. Use the
no ingress-checking
interface command to disable this
function of a port.
Example
This example shows how to set ingress checking to enabled at ethernet port 4.1.
Verify the settings by entering the
show vlan interface
command.
Switch(config)# interface eth4.1
Switch(config-if)# ingress-checking
Summary of Contents for DGS-6600 Series
Page 1: ...0 9 3 ...
