DGS-6604
mm
dot1x port-control
CLI Reference Guide
179
dot1x port-control
Use this command to manually control the authorization state on a specific port.
dot1x port-control {auto
|
force-authorized
|
force-unauthorized}
Default
auto
Command Mode
Interface configuration
Usage Guideline
This command is valid only for physical port interface.
Global 802.1x authentication function should be enabled using the
dot1x
system-auth-control command on page 182
before enabling 802.1X
authentication on a specific port.
Example
This example shows how to deny all access on eth4.1.
Verify the settings with the
show dot1x
auth-configuration
command.
Syntax Description
auto
The state (authorized or unauthorized) for a specific port is determined
according to the outcome of the authentication.
force-authorized
Specifies to force the port to change to the authorized state. The port allows
access and all authentication packets are ignored.
force-unauthorized
Specifies to force the port to change to the unauthorized state. The port is
blocked and all authentication packets are ignored.
Switch# configure terminal
Switch(config)# interface eth4.1
Switch(config-if)# dot1x port-control force-unauthorized
Summary of Contents for DGS-6600 Series
Page 1: ...0 9 3 ...
