DGS-6604
m
snmp-server host
CLI Reference Guide
851
snmp-server host
Use the command to specify the recipient of a SNMP notification operation. Use
the no command to remove the recipient.
snmp-server host {
IP-ADDRESS
} [version {1| 2c | 3 {auth | noauth | priv }}]
WORD
[
vlan-
interface
]
no snmp-server host {
IP-ADDRESS
}
Default
No host entry exists.
If no version option is specified, the default version is 1.
Command Mode
Global configuration at privilege level 15
Usage Guideline
SNMP notifications are sent as trap packets. If you do not enter an
snmp-server
host
command, no notifications are sent. In order to configure the switch to send
SNMP notifications, you must create at least one recipient of a SNMP notification
by
snmp-server host
command.
To create an SNMP host where the notification will be sent to, the user can
specify the version of notification packet. For V1 and V2 SNMP, the notification
will be sent in trap protocol data unit (PDU). For V3 SNMP, the notification will be
sent in the SNMPv2-TRAP-PDU with the SNMPv3 header.
Syntax Description
IP-ADDRESS
Name, IPv4 or IPv6 address of the SNMP notification host.
version
(Optional) Version of the SNMP used to send the traps. The default is 1. If you use
the
version
keyword, one of the following keywords must be specified:
• 1
—SNMPv1. This option is not available with informs.
• 2c
—SNMPv2C.
• 3
—SNMPv3. The most secure model, because it allows packet encryption with the
priv
keyword. One of the following three optional security level keywords can follow
the
3
keyword:
–
auth
— Enables Message Digest 5 (MD5) and Secure Hash Algorithm
(SHA) packet authentication.
–
noauth
—Specifies that the noAuthNoPriv security level applies to this
host. This is the default security level for SNMPv3.
–
priv
—Enables Data Encryption Standard (DES) packet encryption (also
called “privacy”).
WORD
Password-like community string is sent with the notification operation. If the version
is 3, The
COMMUNITY-STRING
is used as the
UserName
defined by the
snmp-
server user
command. The community string that consists of from 1 to 32
characters. The syntax is general string that does not allow space.
vlan-interface
When input IP-ADDRESS is IPv6 link-local address, user must choose an existing
vlan-interface to specify output interface for a destination.
Summary of Contents for DGS-6600 Series
Page 1: ...0 9 3 ...