DGS-6604
m
show port-security
CLI Reference Guide
740
show port-security
Use this command to display the current port security setting.
show port-security [interface
INTERFACE-ID
[, | -]] [address]
Default
None
Command Mode
User EXEC or any configuration mode
Usage Guideline
If no interface ID is specified, the
show port-security
command will display the
port security setting of all existing port interfaces.
If the mac-address
address
option is specified, the configured and learned
secure MAC address entries will be displayed.
If no optional keyword is specified with
show port-security
command, all of the
port-security information is displayed.
Examples
This example shows how to display the port security setting of interface port
eth4.1.
Syntax Description
INTEFACE-ID
(Optional) Specifies the ID of interfaces to display.
,
(Optional) Specifies a series of interfaces, or separate a range of interfaces from
a previous range. No space before and after the comma.
-
(Optional) Specifies a range of interfaces. No space before and after the hyphen.
address
(Optional) Display all the secure MAC addresses including both of configured
and learned entries.
DGS-6600:15#show port-security interface eth4.1
Interface Max No. Current No. Violation Secure Type State
---------------------------------------------------------------------------
eth4.1 1 0 Shutdown Delete-on-Timeout Disabled
Total Entries: 1
Summary of Contents for DGS-6600 Series
Page 1: ...0 9 3 ...
