DGS-6604
ip route multi-path
CLI Reference Guide
320
ip route multi-path
Use ip route multi-path to enable multiple paths for same route. Use the no form
of the command to disable multiple paths.
ip route multi-path
no ip route multi-path
Syntax
Description
None
Default
Enabled
Command Mode
Global configuration
Usage Guideline
If there are multiple routes with the same network-prefix co-existing, specify the
route operation mode (multi-path or not) to select the routes that will be active.
For the no command, it disables the multiple path function. Only one of the
multiple paths will be active.
Note
: The active path may change from one path to the other under multiple
paths mode, as long as the available route with a greater priority becomes
reachable.
Examples
This example shows how to enable multiple paths function.
This example shows how to disable multiple paths function.
Verify the settings by entering the
show ip route summary
command.
Switch(config)# ip route multi-path
Switch(config)# no ip route multi-path
Summary of Contents for DGS-6600 Series
Page 1: ...0 9 3 ...
