DGS-6604
m
periodic
CLI Reference Guide
472
periodic
Use the
periodic
command to specify the period of time to be covered in a time
range profile.
periodic {daily
HH:MM
to
HH:MM
| monthly
DATE
HH:MM
to
[DATE]
HH:MM
| weekly
WEEKLY-
DAY HH:MM
to
[
WEEKLY-DAY
]
HH:MM
}
Default
None
Command Mode
Time-range configuration
Usage Guideline
Up to 6 periods can be specified in the same profile. A new period entry can
partially overlap an older existing one. If a new period's starting and the ending
time are identical to a previous entry, a warning message is displayed and the
configuration will not be accepted.
Note:
To remove an individual period entry delete the time-range and then create
a new time-range to which the correct period entry can be added.
Example
This example shows how to make a time-range which includes the periods daily
09:00 to 12:00, 00:00 Saturday to 23:59 Sunday, and 19:00 of the 1st day to
17:00 of the 2nd day of every month.
Verify the settings by entering the
show time-range
command.
Syntax Description
daily
HH:MM to
HH:MM
Specifies the time of day with an hour:minute format
HH:MM
, using a 24-hour
clock (for example, 14:30). The first
HH:MM
time entered must be earlier than
the second
HH:MM.
Note: The HH range is 00 ~ 23; The MM range is 00 ~ 59.
weekly
WEEKLY-DAY
HH:MM
to
[
WEEKLY-
DAY
]
HH:MM
Specifies the day of the week and time of day in the format
day HH:MM
, where
the day of the week name is used i.e. monday, tuesday, wednesday, thursday,
friday, saturday, and sunday.
If the ending day of the week is the same as the starting day of the week, it can
be omitted (then it is the same as the daily format).
monthly
DATE
HH:MM
to
[
DATE
]
HH:MM
Specifies the numeric date, from 1 to 31, and the time of day, in the format
DATE
HH:MM
.
If the day does not exist on the calender, the specified time period will be
skipped. For example, since April has only 30 days an entry such as “April 31”
will be ignored.
Switch(config)#time-range rdtime
Switch(config-time-range)#periodic daily 9:00 to 12:00
Switch(config-time-range)#periodic weekly saturday 00:00 to sunday 23:59
Switch(config-time-range)#periodic monthly 1 19:00 to 2 17:00
Switch(config)#end
Summary of Contents for DGS-6600 Series
Page 1: ...0 9 3 ...
