DGS-6604
m
show ip ospf neighbor
CLI Reference Guide
676
show ip ospf neighbor
Use this command to display information about the OSPF neighbors.
show ip ospf neighbor [
IFNAME
|
NEIGHBOR-ID
] [detail]
Default
None
Command Mode
User EXEC
Usage Guideline
Displays information about the OSPF neighbors. If no interface type/number is
specified the OSPF neighbor information for all interfaces will be displayed.
Example
The following is sample output from the
show ip ospf neighbor
.
Syntax Description
IFNAME
(Optional) Specifies the type of the interface to display the neighbor information
for.
NEIGHBOR-ID
(Optional) Neighbor ID.
detail
(Optional) Detail of neighbors.
Switch#show ip ospf neighbor
Neighbor ID Pri State Dead Time Address
Interface
47.65.49.111 2 Full/DR 0DT0H1M11S 47.65.49.111 vlan49
Total Entries: 1
Switch#
Switch#
Switch#show ip ospf neighbor detail
Neighbor 47.65.49.111, interface address 47.65.49.111
In the area 0.0.0.0 via interface vlan49
Neighbor priority is 2, State is Full, 6 state changes
DR is 47.65.49.111, BDR is 47.65.49.1
Options is 0x02 (*|-|-|-|-|-|E|-)
Dead timer due in 0DT0H1M13S
Neighbor is up for 0DT0H13M51S
Crypt Sequence Number is 0
Total Entries: 1
Switch#
Summary of Contents for DGS-6600 Series
Page 1: ...0 9 3 ...