DGS-6604
m
show ip rip database
CLI Reference Guide
691
show ip rip database
To display summary address entries in the Routing Information Protocol (RIP)
routing database entries, use the
show ip rip database
command.
show ip rip database
Syntax
None
Default
None
Command Mode
User EXEC or any configuration mode
Usage Guideline
show ip rip database
will display route information, such as: network, next hop,
metric, from, if, time.
Examples
The following output shows a summary address.
Display Field
Descriptions
Description of significant display fields.
Switch# Show ip rip database
Codes: R - RIP, Rc - RIP connected, Rs - RIP static, K - Kernel,
C - Connected, S - Static, O - OSPF, I - IS-IS, B - BGP
Network Next Hop Metric From If Time
Rc 10.0.0.0/8 1 vlan1
Rc 20.0.0.0/8 1 vlan2
R 30.0.0.0/8 20.33.24.1 2 20.33.24.1 vlan2 0DT0H2M44S
40.33.24.8 5 40.33.24.2 vlan3 0DT0H2M30S
Total Entries: 3 entries, 4 routes
Switch#
Display Field
Description
Rc 10.0.0.0/8
Directly connected entry to vlan1.
Rc 20.0.0.0/8
Directly connected entry to vlan2.
R 30.0.0.0/8 via, etc.
The destination 30.0.0.0/8 is learned via RIP. There are two sources
advertising it. One is 20.33.24.1 via vlan2 and it was updated 16 seconds ago.
The other source is 40.33.24.8 via vlan3, and it was updated 30 seconds ago.
Summary of Contents for DGS-6600 Series
Page 1: ...0 9 3 ...
