manualshive.com logo in svg

D-Link DGS-1510/ME Series, Reference Manual

The D-Link DGS-1510/ME Series Reference Manual is a comprehensive guide for users seeking detailed instructions on maximizing the potential of their DGS-1510/ME Series product. Obtain this invaluable resource for free by visiting our website and effortlessly downloading the manual, ensuring you fully optimize your device's capabilities.

Share
Download
background image

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide 

132 

 

file

 - Specifies to display the configuration file. 

<pathname 64>

 - Enter an absolute pathname on the device file system. If pathname is not specified, the boot 

up configuration is implied. This name can be up to 64 characters long. 

include

 - (Optional) Specifies to include lines that contain the specified filter string. 

exclude

 - (Optional) Specifies to exclude lines that contain the specified filter string. 

begin

 - (Optional) Specifies the first line that contains the specified filter string will be the first line of the output. 

<filter_string 80>

 - Enter a filter string that is enclosed by the symbol ". Thus, the filter string itself cannot contain 

the “ character. The filter string is case sensitive. This value can be up to 80 characters long. 

<filter_string 80>

 - (Optional) Enter a filter string that is enclosed by the symbol ". Thus, the filter string itself 

cannot contain the “ character. The filter string is case sensitive. This value can be up to 80 characters 
long. 

<filter_string 80>

 - (Optional) Enter a filter string that is enclosed by the symbol ". Thus, the filter string 

itself cannot contain the “ character. The filter string is case sensitive. This value can be up to 80 
characters long. 

include

 - (Optional) Specifies to include lines that contain the specified filter string. 

exclude

 - (Optional) Specifies to exclude lines that contain the specified filter string. 

begin

 - (Optional) Specifies the first line that contains the specified filter string will be the first line of the output. 

<filter_string 80>

 - Enter a filter string that is enclosed by the symbol ". Thus, the filter string itself cannot 

contain the “ character. The filter string is case sensitive. This value can be up to 80 characters long. 

<filter_string 80>

 - (Optional) Enter a filter string that is enclosed by the symbol ". Thus, the filter string 

itself cannot contain the “ character. The filter string is case sensitive. This value can be up to 80 
characters long. 

<filter_string 80>

 - (Optional) Enter a filter string that is enclosed by the symbol ". Thus, the filter 

string itself cannot contain the “ character. The filter string is case sensitive. This value can be up 
to 80 characters long. 

include

 - (Optional) Specifies to include lines that contain the specified filter string. 

exclude

 - (Optional) Specifies to exclude lines that contain the specified filter string. 

begin

 - (Optional) Specifies the first line that contains the specified filter string will be the first line of the 

output. 

<filter_string 80>

 - Enter a filter string that is enclosed by the symbol ". Thus, the filter string itself 

cannot contain the “ character. The filter string is case sensitive. This value can be up to 80 
characters long. 

<filter_string 80>

 - (Optional) Enter a filter string that is enclosed by the symbol ". Thus, the filter 

string itself cannot contain the “ character. The filter string is case sensitive. This value can be up 
to 80 characters long. 

<filter_string 80>

 - (Optional) Enter a filter string that is enclosed by the symbol ". Thus, the filter 

string itself cannot contain the “ character. The filter string is case sensitive. 

 

Restrictions 

Only Administrators can issue this command. 

 

Example 

The following example illustrates how the special filters, ‘modified’, affect the configuration display: 

Summary of Contents for DGS-1510/ME Series















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DGS-1510/ME Series

Parker H Series Installation & Service Instructions Manual preview
H Series
Brand: Parker Pages: 344
Conceptronic C150BRS4 Multi Language Quick Manual preview
C150BRS4
Brand: Conceptronic Pages: 2
NETGEAR RAXE500 User Manual preview
RAXE500
Brand: NETGEAR Pages: 169
Dahua NVRPRO User Manual preview
NVRPRO
Brand: Dahua Pages: 113
Ethernet Direct Husky HMG-1648EP User Manual preview
Husky HMG-1648EP
Brand: Ethernet Direct Pages: 16
Chase Research IOLINK-130 Installation & Application Manual preview
IOLINK-130
Brand: Chase Research Pages: 114
Echelon i.LON SmartServer Hardware Manual preview
i.LON SmartServer
Brand: Echelon Pages: 34
Matrix Switch Corporation MSC-XD88S Product Manual preview
MSC-XD88S
Brand: Matrix Switch Corporation Pages: 60
TRENDnet TEW-752DRU User Manual preview
TEW-752DRU
Brand: TRENDnet Pages: 68
l-com IES-2205 User Manual preview
IES-2205
Brand: l-com Pages: 11
Ozito RTB-001 Instruction Manual preview
RTB-001
Brand: Ozito Pages: 8
Digi TransPort LR54 User Manual preview
TransPort LR54
Brand: Digi Pages: 1113
KTI Networks KGS-2421 User Manual preview
KGS-2421
Brand: KTI Networks Pages: 147
Furukawa electric FITELwave AG20E (L) Instruction Manual preview
FITELwave AG20E (L)
Brand: Furukawa electric Pages: 10
ADTRAN JOBAID T200 IDSL Quick Start Manual preview
JOBAID T200 IDSL
Brand: ADTRAN Pages: 2
Dell PowerVault Manual preview
PowerVault
Brand: Dell Pages: 396
Dell PowerVault 600 Getting Started preview
PowerVault 600
Brand: Dell Pages: 180
Dell EqualLogic PS6010 Hardware Maintenance preview
EqualLogic PS6010
Brand: Dell Pages: 57

Brands by name

Popular brands

Load more brands